User's Manual Part 1

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 91 of 320
Figure 64: Auto Discover
The following figure shows a list of discovered phones. The MAC address, IP Address, Extension (if
assigned), Version, Vendor, Model, Connection Status, Create Config, Options (Edit/Delete/Update) are
displayed in the list.
Figure 65: Discovered Devices
GLOBALCONFIGURATION
GLOBALPOLICY
Global configuration will apply to all the connected Grandstream SIP end point devices in the same LAN
with the UCM6200 no matter what the Grandstream device model it is. It is divided into two levels:
 Web UI->PBX->Zero Config->Global Policy
 Web UI->PBX->Zero Config->Global Templates.
 Global Templates configuration has higher priority to Global Policy configuration.
Global Policy can be accessed in web GUI->PBX->Zero Config->Global Policy page. On the top of the
configuration table, users can select category in the "Options" dropdown list to quickly navigate to the
category. The categories are: