User's Manual Part 1
Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 79 of 320
NTPSERVER
The UCM6200 can be used as a NTP server for the NTP clients to synchronize their time with. To
configure the UCM6200 as the NTP server, set "Enable NTP server" to "Yes" under web
GUI->Settings->NTP Server. On the client side, point the NTP server address to the UCM6200 IP
address or host name to use the UCM6200 as the NTP server.
RECORDINGSST ORAGE
The UCM6200 supports call recordings automatically or manually and the recording files can be saved in
external storage plugged in the UCM6200 or on the UCM6200 locally. To manage the recording storage,
users can go to UCM6200 web GUI->Settings->Recordings Storage page and select whether to store
the recording files in USB Disk, SD card or locally on the UCM6200.
Figure 53: Settings->Recordings Storage
If “Enable Auto Change” is selected, the recording files will be automatically saved in the available
USB Disk or SD card plugged into the UCM6200. If both USB Disk and SD card are plugged in, the
recording files will be always saved in the USB Disk.
If “Local” is selected, the recordings will be stored in UCM6200 internal storage.
If “USB Disk” or “SD Card” is selected, the recordings will be stored in the corresponding plugged in
external storage device. Please note the options “USB Disk” and “SD Card” will be displayed only if
they are plugged into the UCM6200.