User's Manual Part 1
Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 73 of 320
The following figure shows a sample Email settings on the UCM6200, assuming the Email is using
smtp.gmail.com as the SMTP server.
Figure 47: UCM6200 Email Settings
Once the configuration is finished, click on "Test". In the prompt, fill in a valid Email address to send a test
Email to verify the Email settings on the UCM6200.
TIMESETTINGS
AUTOTIMEUPDATING
The current system time on the UCM6200 is displayed on the upper right of the web page. It can also be
found under Web GUI->Status->System Status->General.
To configure the UCM6200 to update time automatically, go to Web GUI->Settings->Time
Settings->Time Auto Updating.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
The configurations under Web GUI->Settings->Time Settings->Time Auto Updating page require
reboot to take effect. Please consider configuring auto time updating related changes when setting up the
UCM6200 for the first time to avoid service interrupt after installation and deployment in production.
--------------------------------------------------------------------------------------------------------------------------------------------