User's Manual Part 1

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 54 of 320
Figure 26: UCM6204 Static Route Sample
The network topology of the above diagram is as below:
 Network 192.168.69.0 has IP phones registered to UCM6204 LAN 1 address
 Network 192.168.40.0 has IP phones registered to UCM6204 LAN 2 address
 Network 192.168.66.0 has IP phones registered to UCM6204 via VPN
 Network 192.168.40.0 has VPN connection established with network 192.168.66.0
In this network, by default the IP phones in network 192.168.69.0 are unable to call IP phones in network
192.168.66.0 when registered on different interfaces on the UCM6204. Therefore, we need configure a
static route on the UCM6204 so that the phones in isolated networks can make calls between each other.
Figure 27: UCM6204 Static Route Configuration