User's Manual Part 1

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 46 of 320
Table 8: Change Binding Email option
Enter the password
of the account
Enter the current login user credential for UCM6200
Email Address
Email Address is used to retrieve password when password is lost
NETWORKSETTINGS 
After successfully connecting the UCM6200 to the network for the first time, users could login the Web GUI
and go to Settings->Network Settings to configure the network parameters for the device.
Additional network functions and settings are available for UCM6202 and UCM6204:
 UCM6202/UCM6204 supports Route/Switch/Dual mode functions.
In this section, all the available network setting options are listed for all models. Select each tab in web
GUI->Settings->Network Settings page to configure LAN settings, WAN settings (UCM6202/UCM6204
only), 802.1X and Port Forwarding (UCM6202/UCM6204 only).
BASICSETTINGS
Please refer to the following tables for basic network configuration parameters on UCM6202/UCM6204,
and UCM6208 respectively.
Table 9: UCM6202/UCM6204 Network Settings->Basic Settings
Method
Select "Route", "Switch" or "Dual" mode on the network interface of UCM6200.
The default setting is "Route".
 Route
WAN port interface will be used for uplink connection. LAN port interface will
be used to serve as router.
 Switch
WAN port interface will be used for uplink connection. LAN port interface will
be used as bridge for PC connection.
 Dual
Both ports can be used for uplink connection. Users will need assign LAN 1 or
LAN 2 as the default interface in option "Default Interface" and configure
"Gateway IP" for this interface.