User's Manual Part 1

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 168 of 320
Figure 100: Enable SLA Mode for Analog Trunk
Click on “Save”. The analog trunk will be listed with trunk mode “SLA”.
Figure 101: Analog Trunk with SLA Mode Enabled
2. On the UCM6200, go to web UI->Basic/Call Routes->SLA Station page, click on “Create New SLA
Station”. Please refer to section [CREATE/EDIT SLA STATION] for the configuration parameters. Users
can create one or more SLA stations to monitor the analog trunk. The following figure shows two
stations, 1002 and 1005, are configured to be associated with SLA trunk “fxo1”.
Figure 102: SLA Example - SLA Station
3. On the SIP phone 1, configure to register UCM6200 extension 1002. Configure the MPK as BLF mode