User's Manual Part 1

ManualsBrandsGrandstream Networks ManualsElectronicsIP PBX

161

162

163

164

165

166

167

168

169

170

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 160 of 320

Enable CC

If enabled, the system will automatically alert the user when a called party

is available, given that a previous call to that party failed for some reason.

CC Max Agents

Configure the maximum number of CCSS agents which may be allocated

for this channel. In other words, this number serves as the maximum

number of CC requests this channel is allowed to make. The minimum

value is 1.

CC Max Monitors

Configure the maximum number of monitor structures which may be

created for this device. In other words, this number tells how many callers

may request CC services for a specific device at one time. The minimum

value is 1.

Table 52: Create New IAX Trunk

Type

Select the VoIP trunk type.

 Peer IAX Trunk

 Register IAX Trunk

Provider Name

Configure a unique label to identify this trunk when listed in outbound

rules, inbound rules and etc.

Host Name

Configure the IP address or URL for the VoIP provider’s server of the

trunk.

Keep Trunk CID

If enabled, the trunk CID will not be overridden by extension's CID when

the extension has CID configured. The default setting is "No".

Username

Enter the username to register to the trunk from the provider when

"Register IAX Trunk" type is selected.

Password

Enter the password to register to the trunk from the provider when

"Register IAX Trunk" type is selected.

Disable This Trunk

If selected, the trunk will be disabled.

Table 53: IAX Register Trunk Configuration Parameters

Basic Settings