User's Manual Part 1

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 107 of 320
(2) Global Templates
Select a global template to be used for the device and click on
to add. Multiple global
templates can be selected and users can arrange the priority by adjusting orders via
and .
All the selected global templates will take effect. If the same option exists on multiple selected
global templates, the value in the template with higher priority will override the one in the template
with lower priority. Click on
to remove the global template from the selected list.
(3) Default Model Template
Default Model Template will be applied to the devices of this model. Default model template can be
configured in model template under web UI->PBX->Zero Config->Model Templates page.
Please see default model template option in [Table 32: Create New Model Template].
(4) Model Templates
Select a model template to be used for the device and click on
to add. Multiple global
templates can be selected and users can arrange the priority by adjusting orders via
and .
All the selected model templates will take effect. If the same option exists on multiple selected
model templates, the value in the template with higher priority will override the one in the template
with lower priority. Click on
to remove the model template from the selected list.
(5) Customize Device Settings
This is the highest level configuration for the device. Click on “Modify Customize Device Settings”
and following dialog will show.