User's Manual

Firmware Version 1.0.0.1
UCM6200 Series IP PBX User Manual
Page 267 of 321
G.721 Compatible
Configure to enable/disable G.721 compatible. The default setting is Yes.
G.726
Configure the payload type for G.726 if "G.721 Compatible" is disabled.
The default setting is 111.
iLBC
Configure the payload type for iLBC. The default setting is 97.
H.264
Configure the payload type for H.264. The default setting is 99.
H.263P
Configure the payload type for H.263+. The default setting is 100 103.
VP8
Configure the payload type for VP8. The default settings is 108.