User's Manual

Firmware Version 1.0.0.1
UCM6200 Series IP PBX User Manual
Page 176 of 321
Figure 104: Inbound Route feature: Prepend
The following example demonstrates the process,
1. If Trunk provides a DID pattern of 18005251163.
2. If Strip is set to 8, UCM6200 will strip the first 8 digits.
3. If Prepend is set to 2, UCM6200 will then prepend a 2 to the stripped number, now the number
become 2163.
4. UCM6200 will now forward the incoming call to extension 2163.
INBOUND ROUTE: MULTIPLE MODE
In the UCM6200, the user can configure inbound route to enable multiple mode to switch between different
destinations. The inbound multiple mode can be enabled under Inbound Route settings.