User Manual and Operating Guide

Epygi Technologies Configuring Grandstream IP Phones on Quadro LAN
Figure 4-Configuring an IP line
4 Completing Grandstream IP Phones Configuration
To complete Grandstream IP phone configuration using Auto-configuration option, reset the phone
to factory default settings. Please see the instructions below that describe how to restore the
default configuration on the Grandstream SIP phones.
Please note: If a SIP phone obtains its basic network parameters from a DHCP server other than
the Quadro’s built-in DHCP server, certain configuration changes will be required on the DHCP
server in use. Please refer to Section
7.
PAGE 7 27-Sep-07