user manual

Grandstream Networks, Inc., 1297 Beacon St., 2
nd
Flr, Brookline, MA 02446 USA
Tel: [phone], FAX: [phone]
www.grandstream.com
P
P
S
S
T
T
N
N
C
C
l
l
o
o
u
u
d
d
Anywhere in the world
GXW-410x
4 or 8 Ports
FXO Lines
PSTN Analog Lines
Grandstream IP Phones
IPPBX or
SIP Server
IP/L
AN
IP/WAN
Connect the GXW410x
Please use the equipment included in the packaging. Using any other power source may damage the
product.
1. Connect one or more PSTN (PBX) telephone lines to FXO ports.
2. Insert the Ethernet cable into the WAN port and connect the other end of the Ethernet cable to an uplink port
(a router or a modem, etc.).
3. Connect a PC to the LAN port (optional).
4. Insert the power adapter into the GXW-410x and connect it to an electrical outlet.
5. Using the GXW-400x embedded web server, you can further configure the device.
Configuring the GXW410x using a Web Browser
1. By default, GXW410x has DHCP option turned on.
2. To find out GXW410x’s IP address, please download “Grandstream Device IP Discovery” tool
from
http://www.grandstream.com/resources.html. Please follow the instructions below on how to use the
tool:
a. Run "IP Query.exe"
b. Select the network interface that has access to the GXW410x.
c. Click “Listen” to start sniffing on the network interface.
d. Reboot the GXW410x.
e. Select the desired entry from output box
3. Type the GXW410x’s IP address in your PC web browser.
4. Log in using password “admin” to configure the unit.
You may then change it to use static IP address or PPPoE according to your local network environment.
There are 2 methods to configure GXW410x to work with IP PBX:
METHOD Description
METHOD 1
Configure GXW410x with SIP Accounts in IP PBX,
this will enable you to put GXW-410x behind a
NAT/Firewall (Used for one-stage and two-stage
dialing)
Last updated on April 1, 2008
3