user manual

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 50 of 52

In addition, when the field “Check New Firmware only when F/W pre/suffix changes” is set to “Yes”, the

device will only issue firmware upgrade request if there are changes in the firmware Prefix or Postfix.

MANAGING FIRMWARE AND CONFIGURATION FILE DOWNLOAD

When “Automatic Upgrade” is set “Yes, every” the auto check will be done in the minute specified in this

field. If set to “daily at hour (0-23)”, Service Provider can use P193 (Auto Check Interval) to have the

devices do a daily check at the hour set in this field with either Firmware Server or Config Server. If set to

“weekly on day (0-6)” the auto check will be done in the day specified in this field. This allows the device

periodically check if there are any new changes need to be taken on a scheduled time. By defining different

intervals in P193 for different devices, Server Provider can spread the Firmware or Configuration File

download in minutes to reduce the Firmware or Provisioning Server load at any given time.

Automatic Upgrade:

No Yes, every

10080

minutes(60-5256000).

Yes, daily at hour

(0-23). Yes, weekly on day

(0-6).