user manual

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 11 of 52
CONNECTING THE DP710 CHARGER UNIT
To setup the DP710, follow the steps below:
Plug the 7V DC power adapter into an electrical outlet to start using the charger unit.
Figure 2: CONNECTING THE DP710 CHARGER UNIT
SETTING UP THE DP715/710 HANDSET
To setup the handset, follow the steps below:
1. Open the battery compartment (see below).
2. Insert the batteries in the correct polarity (+ and -).
3. Close the battery compartment.
4. To charge the rechargeable batteries for the first time, place the handset in the base unit or
charger unit for 16 hours.
Figure 3: INSERTING THE BATTERIES IN THE HANDSET
2
1
1
2
3
1. Battery compartment cover
2. Batteries
3. Rear of Handset
1 Underside of the charger unit
2 Power supply plug