Manualshelf

user manual

ManualsBrandsGrandstream Networks ManualsIP PhoneIP MULTIMEDIA PHONE GXV3175
41424344454647484950
Grandstream Networks, Inc. GXV3175 USER MANUAL Page 43 of 119
FIRMWARE VERSION 1.0.0.32 Updated : 12/2010
AP/Managed. By default, it is set to “AP or Managed”.
Channel This parameter defines the channel (1-10) for the wireless network. The
default setting is set to “Auto”.
ESSID This parameter sets the ESSID for the Wireless network. Press “Scan” to
scan for the available wireless network and add it. Users can also press
“Add” to add the ESSID directly.
Security Mode This parameter defines the security mode used for the wireless network.
The following are supported: WEP/Shared, WEP/OPEN, WPA PSK TKIP,
WPA PSK AES, WPA2 PSK TKIP, WPA2 PSK AES. The default setting is
set to “Disabled”.
Users will need to enter the corresponding authentication password for the
security mode.
Maintenance/Time Settings
NTP Server
This parameter defines the URL or IP address of the NTP (Network Time
Protocol) server. The GXV3175 phone may obtain the date and time from
the server.
The default setting is ntp.ipvideotalk.com.
DHCP Option 42 override
NTP server
Select Yes for the user to allow DHCP Option 2 to override the NTP server if
there is one on the LAN. The default setting is NO.
Time Zone This parameter controls the date/time display according to the specified time
zone.
Time Display Format This parameter sets time display format to 12 Hour or 24 Hour
Date Display Format This parameter sets date display format to YY-MM-DD or MM-DD-YY or
DD-MM-YY.
Self-Defined Time Zone This parameter allows the users to define their own time zone.
Syntax: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M3.2.0,M11.1.0, MTZ+6MDT+5
This indicates a time zone with 6 hours offset with 1 hour ahead which is
U.S central time. If it is positive (+) if the local time zone is west of the Prime
Meridian (A.K.A: International or Greenwich Meridian) and negative (-) if it is
east.
M3.2.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd