User's Manual

P a g e | 23
HT812/HT814 User Guide
6. After configuring the SIP server and activating the profiles, you should access to FXS Ports page
to register your accounts. In FXS Ports tab, set the following:
a. SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form
of digit similar to phone number or actually a phone number.
b. Authenticate ID: SIP service subscriber’s Authenticate ID used for authentication. Can be identical
to or different from SIP User ID.
c. Authenticate Password: SIP service subscriber’s account password to register to SIP server of
ITSP. For security reasons, the password will field will be shown as empty.
d. Name: Any name to identify this specific user.
e. Set Enable Port to Yes.
For more information, related to above options please refer to Profile(s) settings and FXS Port Settings.
7. Press Apply at the bottom of the page to save your configuration.
After applying your configuration, your account will register to your SIP Server, you can verify if it has been
correctly registered with your SIP server from your HT812/HT814 web interface under Status > Port Status
-> Registration (If it displays Registered, it means that your account is fully registered, otherwise it will
display Not Registered so in this case you must double check the settings or contact your provider).
Figure 10: SIP Profiles Settings
Figure 11: SIP Accounts settings