User's Manual

P a g e | 20
HT812/HT814 User Guide
Changing Admin Level Password
1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings > Admin Password.
5. Enter the new admin password.
6. Press Apply at the bottom of the page to save your new settings.
Changing User Level Password
1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings > End User Password.
5. Enter the new end-user password.
6. Press Apply at the bottom of the page to save your new settings.
Changing HTTP Web Port
1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings > Web Port.
5. Change the current port to your desired/new HTTP port. Ports accepted are in range [1-65535].
6. Press Apply at the bottom of the page to save your new settings
Figure 7: Admin Level Password
Figure 8: User Level Password