User's Manual

FIRMWARE VERSION 1.0.0.5 HT802 USER MANUAL Page 7 of 46
CONNECT YOUR HT802
Connecting the HT802 is easy. Before you begin, please verify the contents of the HT802 package.
EQUIPMENT PACKAGING
The HT802 ATA package contains:
 One HT802 Main Case
 One Universal Power Adaptor
 One Ethernet Cable
 One Vertical Stand (Only on HT702 and HT704 Packages)
CONNECTING THE HT802
The HT802 is designed for easy configuration and easy installation. Configure the HT802 following the
directions in the Configuration section of this manual.
1. Insert a standard RJ11 telephone cable into the Phone port and connect the other end of the
telephone cable to a standard touch-tone analog telephone.
2. Insert the Ethernet cable into the Internet or LAN port of the HT802 and connect the other end of
the Ethernet cable to an uplink port (a router or a modem, etc.)
3. Insert the power adapter into the HT802 and connect it to a wall outlet.
The HT802 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total
solution for networks providing VoIP services. The HT802 VoIP features and functions are available
using a regular analog telephone.
LAN Port
(RJ-45 connector
10/100 Mbps )