User's Manual

P a g e | 39
HT801 Administration Guide
Register a SIP Account
The HT801 supports 1 FXS port which can be configured with 1 SIP account. Please refer to the following
steps in order to register your accounts via web user interface :
1. Access your HT801 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to FXS Port page.
5. In FXS Port tab, set the following:
a. Account Active to Yes.
b. Primary SIP Server field with your SIP server IP address or FQDN.
c. Failover SIP Server with your Failover SIP Server IP address or FQDN. Leave empty if not available.
d. Prefer Primary SIP Server to No or Yes depending on your configuration. Set to No if no Failover
SIP Server is defined. If “Yes”, account will register to Primary SIP Server when failover registration
expires.
e. Outbound Proxy: Set your Outbound Proxy IP Address or FQDN. Leave empty if not available.
f. SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form
of digit similar to phone number or actually a phone number.
g. Authenticate ID: SIP service subscriber’s Authenticate ID used for authentication. Can be identical
to or different from SIP User ID.
h. Authenticate Password: SIP service subscriber’s account password to register to SIP server of ITSP.
For security reasons, the password will field will be shown as empty.
i. Name: Any name to identify this specific user.
For more information, related to above options please refer to FXS Port Settings.
6. Press Apply at the bottom of the page to save your configuration.
Figure 8: SIP Accounts Settings