User's Manual

P a g e | 24
HT801 Administration Guide
Authenticate
Conf File
Authenticates configuration before being accepted. This protects the configuration from
unauthorized modifications. Default is No.
SIP TLS Certificate
Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT801 has built-
in private key and SSL certificate.
SIP TLS Private
Key
Specifies TLS private key used for SIP over TLS is in X.509 format.
SIP TLS Private
Key Password
Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Enable TR-069
Sets the phone system to enable the “CPE WAN Management Protocol” (TR-069).
Default setting is No.
ACS URL
Specifies URL of TR-069 Auto Configuration Servers (e.g.,
http://acs.mycompany.com), or IP address.
ACS Username
Enters username to authenticate to ACS.
ACS Password
Enters password to authenticate to ACS.
Periodic Inform
Enable
Sends periodic inform packets to ACS. Default is No
Periodic Inform
Interval
Sets frequency that the inform packets will be sent out to ACS.
Connection
Request Username
Enters username for ACS to connect to the HT801.
Connection
Request Password
Enters password for ACS to connect to the HT801.
CPE SSL Certificate
Configures the Cert File for the phone to connect to the ACS via SSL.
CPE SSL Private
Key
Specifies the Cert Key for the phone to connect to the ACS via SSL.
System Ring
Cadence
Sets ring cadences for all incoming calls.
Syntax: c=on1/off1-on2/off2-on3/off3;) Default is set to c=2000/4000; (US standards),
on1 is the period of ringing ("On time" in "ms") while off1 is the period of silence. Up to
three cadences are supported.
Call Progress
Configures tone frequencies according to user preference. By default, the tones are set