User's Manual

P a g e | 21
HT801 Administration Guide
ID
or other identification information about a client. Default is HT8XX.
PPPoE account ID
Defines the PPPoE username. Necessary if ISP requires you to use a PPPoE (Point
to Point Protocol over Ethernet) connection.
PPPoE password
Specifies the PPPoE account password.
PPPoE Service
Name
Defines PPPoE service name. If your ISP uses a service name for the PPPoE
connection, enter the service name here. This field is optional. Default is blank.
Preferred DNS
server
Specifies preferred DNS server to use when DHCP or PPPoE are set.
Time Zone
Selects time zone to define date/time on the device.
Self-Defined Time
Zone
Allows users to define their own time zone.
Allow DHCP server
to set Time Zone
Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will
override selected time zone. If set to “No”, the analogue adapter will use selected time
zone even if provided by DHCP server. The Default setting is Yes.
Language
Configures the languages of the voice prompt and web interface, except Spanish that
it is only in IVR. Available languages: English, Chinese or Spanish IVR.
Reset Type
Gives the administrator the option to restore default configuration on the HT801.
There are 3 types of factory reset:
 ISP Data Reset: All VoIP related configuration (mainly everything located on FXS
page).
 VOIP Data Reset: All ISP (Internet Service Provider) configuration which may
affect the IP address.
 Full Reset: Both VoIP and ISP related configuration at the same time.
Note: After you choose the reset type, you will have to click the reset button to take
effect.
Advanced Settings Page Definitions
Table 8: Advanced Settings
Advanced Settings
New Admin
Password
Defines the administrator level password to access the Advanced Web Configuration
page. This field is case sensitive. Only the administrator can configure the “Advanced