User's Manual

Grandstream Networks, Inc. HT-702 User Manual Page 9 of 32
Firmware Version 1.0.0.17 Last Updated: 02/2012
Device Management
Web interface or via secure encrypted AES or non-encrypted central configuration file
for mass deployment using Grandstream binary file or xml format. Auto/manual
provisioning system or via built-in IVR.
NAT-friendly remote software upgrade (via TFTP/HTTP/HTTPS) for deployed devices
including behind firewall/NAT. Syslog support. Full support of TR-069 management
protocol.
Dial Plan
Yes
Universal Switching
Power Adaptor
Input: 100–240 VAC/50-60 Hz 0.18A Max
Output: 12VDC, 0.5A, UL certified
Environmental
Operational: 32
o
–104
o
F or 0
o
–40
o
C
Storage: 10
o
–130
o
F / Humidity: 10–90% Non-condensing
Dimensions
(H x W x D)
115mm (L) x 75mm (W) x 28mm (H)
Short Haul Loop
5REN, Up to 1Km on 24 AWG wire
Call Handling Features
Caller ID display or block, Call waiting caller ID, Call waiting/flash, Call transfer, hold,
forward, 3-way conferencing, message waiting, Do-Not-Disturb (DND), call-return
service
Caller ID
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Polarity Reversal / Wink
Yes
EMC
EN55022/EN55024 and FCC part15 Class B,CISPR22,CISPR24
Safety
EN60950-1
Hardware Specification
The table below lists the hardware specification of HT702.
T
ABLE 5: HT702 HARDWARE SPECIFICATION
LAN Interface
1 RJ45 10/100Mbps
LED
5 LEDs (GREEN)
Universal Switching
Power Adaptor
Input: 100-240V AC, 50/60Hz, 0.18A Max
Output: 12V DC, 0.5A
UL certified
Dimension
115mm (L) x 75mm (W) x 28mm (H)
Weight
0.36kg
Temperature 32~104°F / 0~40°C
Humidity
10% - 90% (non-condensing)
Compliance