User's Manual

Grandstream Networks, Inc. HT-702 User Manual Page 5 of 32
Firmware Version 1.0.0.17 Last Updated: 02/2012
CONNECT YOUR HT702
Equipment Packaging
The HT702 ATA package contains:
• One HT702 Main Case
• One Universal Power Adaptor
• One Ethernet Cable
Connecting the HT702
The HT702 is designed for easy configuration and easy installation. Configure the HT702 following the
directions in the Configuration section of this manual.
1. Connect a standard touch-tone analog telephone to one of the PHONE ports.
2. Insert a standard RJ11 telephone cable into the Phone1 port and connect the other end of the
telephone cable to the analog telephone.
3. Insert the Ethernet cable into the WAN port of HT702 and connect the other end of the Ethernet
cable to an uplink port (a router or a modem, etc.)
4. Insert the power adapter into the HT702 and connect it to a wall outlet.
The HT702 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total
solution for networks providing VoIP services. The HT702 VoIP features and functions are available using
a regular analog telephone.
Figure 1: Connecting the HT702
Table 1: Definitions of the HT702 Connectors
Power Cable
Power adapter connection
Internet Port (RJ-45)
Connect to the internal LAN network or router.
RESET
Factory Reset button: Press for 7 seconds to reset factory default settings.