User's Manual

Grandstream Networks, Inc. HT-702 User Manual Page 18 of 32
Firmware Version 1.0.0.17 Last Updated: 02/2012
Self-Defined Time Zone The syntax is std offset dst [offset],start[/time],end[/time]
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
Time zone with 6 hours offset with 1 hour ahead which is the US central time. It is positive
(+) if the local time zone is west of the Prime Meridian and negative (-) if it is east.
Prime Meridian (a.k.a: International or Greenwich Meridian)
M3.2.0,M11.1.0
The 1
st
number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
The 2
nd
number indicates the n
th
iteration of the weekday: (1st Sunday, 3rd Tuesday etc)
The 3
rd
number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
Therefore, this example is the DST which starts from the second Sunday of March to the
1st Sunday of November.
Allow DHCP server to
set Time Zone
Default No. Let the DHCP server handle the Time Zone
Language
Languages supported with voice prompt and web interface, except Spanish that it is only
in IVR.
Reset Type
Gives the user the option to set to default all VoIP related configuration (mainly everything
that located on FXS port), all ISP (Internet Service Provider) configuration which may
affect the IP address, or both at the same time.
Note: After you choose the reset type, you will have to push the reset button for it to take
effect.
In addition to the Basic Settings configuration page, end users also have access to the Device Status page.
Table 9: Status Page
MAC Address
The device ID, in HEX format. This is very important ID for ISP troubleshooting. LAN Mac
address will appear in this place. The LAN MAC address will be used for provisioning and
can be found on the label coming with original box and on the label located on the bottom
panel of the device.
LAN IP Address
This field shows the LAN IP address of the HT702.
Product Model
This field contains the product model info.
Hardware Version
This field shows the hardware revision of the unit and the part number.
Software Version
Program: This is the main software release. This number is always used for firmware
upgrade. Current release is 1.0.0.17 Boot and Loader are seldom changed.
Bootloader: current version is 1.0.0.xx.
Core: current version 1.0.0.xx
Base: current version is 1.0.0.xx
Software Status
This field shows the status of the unit and its actual memory.
System Up Time Shows system up time since the last reboot.
PPPoE Link Up
Indicates whether the PPPoE connection is up if the HT702 is connected to DSL modem.