User's Manual

Grandstream Networks, Inc. HT-701 User Manual Page 5 of 32
Firmware Version 1.0.0.17 Last Updated: 02/2012
CONNECT YOUR HT701
Equipment Packaging
The HT701 ATA package contains:
 One HT701 Main Case
 One Universal Power Adaptor
 One Ethernet Cable
Connecting the HT701
The HT701 is designed for easy configuration and easy installation. Configure the HT701 following the
directions in the Configuration section of this manual.
1. Connect a standard touch-tone analog telephone to the PHONE port.
2. Insert a standard RJ11 telephone cable into the Phone1 port and connect the other end of the
telephone cable to the analog telephone.
3. Insert the Ethernet cable into the WAN port of HT701 and connect the other end of the Ethernet
cable to an uplink port (a router or a modem, etc.)
4. Insert the power adapter into the HT701 and connect it to a wall outlet.
The HT701 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total
solution for networks providing VoIP services. The HT701 VoIP features and functions are available using
a regular analog telephone.
Figure 1: Connecting the HT701
Table 1: Definitions of the HT701 Connectors
Power Cable
Power adapter connection
Internet Port (RJ-45)
Connect to the internal LAN network or router.
RESET
Factory Reset button: Press for 7 seconds to reset factory default settings.
FXS Port (RJ-11)
FXS port: to be connected to analog phones / fax machines.
HT-701
Back View
Internet Port
(RJ-45 connector
10/100 Mbps)
Reset
Phone
(RJ-11 FXS Ports)
Power
Supply
(12V)
HT-701
Front View
Display LEDs
(green)