User's Manual

Grandstream Networks, Inc. HT701 User Manual Page 8 of 34
Firmware Version 1.0.4.2 Last Updated: 06/2011
T
ABLE 1: DEFINITIONS OF THE HT701 CONNECTORS
Power Cable
Power adapter connection
INTERNET Port
(RJ-45)
Connect to the internal LAN network or router.
RESET
Factory Reset button. Press for 7 seconds to reset factory default settings.
PHONE (RJ-11)
FXS port to be connected to analog phones / fax machines.
There are four (4) LED buttons that help you manage the status of your HandyTone.
T
ABLE 2: DEFINITIONS OF THE HT701 LEDS
LEDs
POWER LED
Indicates Power. Remains ON when power is connected
INTERNET LED
Indicates device got IP address
LINK/ACT LED
Indicates INTERNET port activity
PHONE LED
Indicate status of the respective FXS Ports-PHONE
NOTE: All LEDs display green when ON. Slow blinking of WAN and LAN LED together indicate the
product in firmware upgrading or provision stat
e.
Figure 2: HT701 Connection Diagram
z
Internet
ADSL/Cable
Modem Ethernet
WAN
LAN
FXS
Fax
Cordless
Phone
Analog Phone
FXS
Fax
Cordless
Phone
Analog Phone