User's Manual

Grandstream Networks, Inc. HT701 User Manual Page 21 of 34
Firmware Version 1.0.4.2 Last Updated: 06/2011
F
IGURE 3: UPLINK/DOWNLINK BANDWIDTH LIMITATION
In addition to the Basic Settings configuration page, end users also have access to the Device Status page.
T
ABLE 8: STATUS PAGE
MAC Address
The device ID, in HEX format. This is very important ID for ISP troubleshooting. LAN and
WAN Mac addresses will appear in this place. The LAN MAC address will be used for
provisioning and can be found on the label coming with original box and on the label
located on the bottom panel of the device.
WAN IP Address
This field shows WAN IP address of HT701.
Product Model
This field contains the product model info.
Software Version
Program: This is the main software release. This number is always used for firmware
upgrade. Current release is 1.0.1.63 Boot and Loader are seldom changed.
Bootloader: current version is 1.0.0.9.
Core: current version 1.0.0.54
Base: current version is 1.0.1.1
System Up Time
Shows system up time since the last reboot.
PPPoE Link Up
Indicates whether the PPPoE connection is up if the HT701 is connected to DSL modem.
NAT
This filed indicates the type of NAT connection used by the HT701 via its WAN port.
Port Status
Displays relevant information regarding the each FXS port.
Port Hook Registration DND Forward
Busy
Forward
Delayed
Forward
FXS On Hook Registered
Yes 613
Advanced User Configuration
Log in to the advanced user configuration page the same way as for the basic configuration page. The
password is case sensitive and the factory default password for Advanced User is “admin”.