User's Manual
FIRMWARE VERSION 1.0.7.6 HT502 USER MANUAL Page 30 of 48
Software Version
Program: This is the main software release. This number is always used for firmware
upgrade. Current release is 1.0.7.6 Boot and Loader are seldom changed.
Bootloader: current version is 1.0.0.9.
Core: current version 1.0.7.1
Base: current version is 1.0.7.6
CPE: current version is 1.0.1.19
System Up Time
Shows system up time since the last reboot.
PPPoE Link Up
Indicates whether the PPPoE connection is up if the HT502 is connected to DSL modem.
NAT
This filed indicates the type of NAT connection used by the HT502 via its WAN port.
Port Status
Displays relevant information regarding the each FXS port.
Port Hook Registration DND Forward Busy
Forward
Delayed
Forward
FXS1 On Hook Registered
Yes 613
FXS2 On Hook Registered
No 614
• Both FXS port1 and FXS port2 are registered with this SIP Server.
• FXS Port 1 user has set Do Not Disturb.
• FXS Port 1 user has set his calls to be forwarded unconditionally to ext 613.
• FXS Port 2 user has set his calls to forward to 614 when his phone is busy.
ADVANCEDUSERCONFIGURATION
Log in to the advanced user configuration page the same way as for the basic configuration page. The
password is case sensitive and the factory default password for Advanced User is “admin”.
Advanced User configuration includes the end user configuration and the advanced configurations
including: a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous
configuration. HT502 each FXS SIP account has its own configuration page. Their configurations are
identical.