User's Manual

FIRMWARE VERSION 1.0.7.6 HT502 USER MANUAL Page 29 of 48
LAN Subnet Mask
Sets the LAN subnet mask. Default value is 255.255.255.0
LAN DHCP Base IP:
Base IP address for the LAN port, which functions as default gateway for its LAN. Default
value is 192.168.2.1
DHCP IP Lease Time Default value is 120 hrs (5 days). The length of time the IP address is assigned to the
LAN clients. Value is set in units of hours.
DMZ IP:
This function forwards all WAN IP traffic to a specific IP address if no matching port is
used by HT502 or in the defined port forwarding.
Port Forwarding
Forwards a matching (TCP/UDP) port to a specific LAN IP address with a specific
(TCP/UDP) port.
FIGURE 3: UPLINK/DOWNLINK BANDWIDTH LIMITATION
In addition to the Basic Settings configuration page, end users also have access to the Device Status
page.
TABLE 8: STATUS PAGE
MAC Address
The device ID, in HEX format. This is very important ID for ISP troubleshooting. LAN and
WAN Mac addresses will appear in this place. The LAN MAC address will be used for
provisioning and can be found on the label coming with original box and on the label
located on the bottom panel of the device.
WAN IP Address
This field shows WAN IP address of HT502.
Product Model
This field contains the product model info.