User Guide

In addition to the Basic Settings configuration page, end users also have access to the Device Status

page.

ABLE 8: HT–502 DEVICE STATUS PAGE DEFINITIONS

MAC Address

The device ID in HEX format. This is needed for ISP troubleshooting.

WAN IP Address

Shows LAN IP address of HT–502.

Product Model

Contains the product model info.

Software Version

Program: This is the main software release. Boot and Loader are seldom

changed.

System Up Time

Shows system up time since the last reboot.

PPPoE Link Up

Indicates whether the PPPoE connection is up if the HT–496is connected

to DSL modem.

NAT

Indicates the type of NAT the HT–496 is connected to via its WAN port.

Based on STUN protocol.

Port

Indicates whether the different FXS Ports are registered to the SIP

server(s).

ADVANCED USER CONFIGURATION

Log-in to the advanced user configuration page the same way as for the basic configuration page. The

password is case sensitive and the factory default password for Advanced User is “admin”.

Advanced User configuration includes the end user configuration and the advanced configurations

including: a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous

configuration. Following is a snap shot of the advanced configuration page.

IGURE 4: SCREENSHOT OF ADVANCED USER CONFIGURATION LOG- IN PAGE

Grandstream Device Configuration

Password

Each FXS SIP account has its own configuration page. Their configurations are identical.

Grandstream Networks, Inc. HT-502 User Manual Page 18 of 31

Firmware 1.0.0.29 Last Updated: 01/2007