User manual

FIRMWARE VERSION 1.0.7.3 HT70X USER MANUAL Page 5 of 52
CHANGE LOG
This section documents significant changes from previous versions of HT70X user manuals. Only major
new features or major document updates are listed here. Minor updates for corrections or editing are not
documented here.
CHANGES FROM 1.0.6.1 USER MANUAL
• Added the options to enable/disable NEC [Disable Network Echo Suppressor].
•
Added the options to restrict outgoing call duration [Outgoing Call Duration Limit].
• Added the options to configure [Ring Frequency].
• Added the options to [Enable High Ring Power], to support device consumer more power from FXS
port.
•
Added the options to enable/disable [Generate Continuous RFC2833 Events].
• Added the options to configure [SIP REGISTER Contact Header Uses] its WAN or LAN address.
• Added the options to [Disable Multiple m line in SDP].
• Added the options to configure [
SIP Timer D].
• Added the options to configure [
Country Specific Deployment].
CHANGES FROM 1.0.5.2 USER MANUAL
• Added the options to enable/disable [Always send HTTP Basic Authentication Information].
•
Added the options to enable/disable [Do Not Escape '#' as %23 in SIP URI].
• Rearrange Layer 2 QoS setting options [Layer 2 QoS], and move [Layer 3 QoS] to FXS Port page.
CHANGES FROM 1.0.4.14 USER MANUAL
• Added the option to define [Voice Frames per TX]
• Added the options to enable/disable [
Use P-Preferred-Identity Header] and [Use Privacy Header]
• Added the option to enable/disable [
Add Auth Header On Initial REGISTER]
CHANGES FROM 1.0.4.8 USER MANUAL
• Added the option to enable/disable [Allow DHCP Option 120( override SIP server )]
• Added the option [
DTMF Caller ID Tone] to define DTMF call ID Start/Stop Tone