User manual

FIRMWARE VERSION 1.0.7.3 HT70X USER MANUAL Page 29 of 52
Allow DHCP server to
set Time Zone
Default Yes. Let the DHCP server handle the Time Zone
Language
Languages supported with voice prompt and web interface, except Spanish that it is only
in IVR.
Reset Type
Gives the user the option to set to default all VoIP related configuration (mainly everything
located on FXS/Profile
page), all ISP (Internet Service Provider) configuration which may
affect the IP address, or both at the same time.
Note: After you choose the reset type, you will have to click the reset button for it to take
effect.
In addition to the Basic Settings configuration page, end users also have access to the Device Status
page.
TABLE 9: STATUS PAGE
MAC Address
The device ID, in HEX format. This is very important ID for ISP troubleshooting. The Mac
address will appear in this place. The MAC address will be used for provisioning and can
be found on the label coming with original box and on the label located on the bottom
panel of the device.
IP Address
This field shows the IP address of the HT70X.
Product Model
This field contains the product model info.
Hardware Version
This field shows the hardware revision of the unit and the part number.
Software Version
Program: This is the main software release.
This number is always used for
firmware
upgrade. Current release is 1.0.3.1. Boot and Loader are seldom changed.
Bootloader: current version is 1.0.0.7.
Core: current version 1.0.3.1.
Base: current version is 1.0.3.1.
CPE: gs_cpe version number information.
System Up Time
Shows system up time since the last reboot.
PPPoE Link Up
Indicates whether the PPPoE connection is up if the HT70X is connected to DSL modem.
NAT
This filed indicates the type of NAT connection used by the HT70X.