User Manual Telephone Adaptor HandyTone-486

HandyTone-486 User Manual Grandstream Networks, Inc.
21
NAT Mapped IP
WAN side public IP if connected to LAN of a SOHO router.
Other Statistical
Status of ATA
Self explainable, see the page displayed.
BASIC
SETTINGS:
End User
Password
This contains the password to access the Web Configuration
Menu. This field is case sensitive with max. 25 characters
IP Address
There are 2 modes where the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static
IP mode are not used (even though they are still saved in the
Flash memory.) The HandyTone ATA will acquire its IP address
from the first DHCP server it discovers from the LAN it is
connected.
To use PPPoE feature set the PPPoE account settings here if
connect the box to DSL modem. The HandyTone will attempt to
establish a PPPoE session if any of the PPPoE fields is set. In this
mode, the WAN side web access is disabled and TFTP upgrade
for firmware is not feasible and HTTP upgrade is only available
solution.
- If Static IP mode is selected, then the IP address, Subnet Mask,
Default Router IP address, DNS Server 1 (primary), DNS Server
2 (secondary) fields will need to be configured. These fields are
reset to zero by default.
Time Zone
This parameter controls how the displayed date/time will be
adjusted according to the specified time zone.
D
a
y
li
g
ht Savin
g
s
Time
This parameter controls whether the displayed time will be
daylight savings time or not. If set to Yes, then the displayed time
will be 1 hour ahead of normal time.
Cloned WAN MAC
Address:
Allow the user to set a specific MAC address. Set in Hex format