User Manual Telephone Adaptor HandyTone-486

HandyTone-486 User Manual Grandstream Networks, Inc.
20
PPPoE Link Up:
disabled
NAT:
detected NAT type is full cone
NAT Mapped IP:
70.22.149.194
NAT Mapped Port:
61063
Total Inbound Calls:
0
Total Outbound Calls:
1
Total Missed Calls:
0
Total Call Time (in minutes):
1
Total SIP Messa
g
e Sent:
12
Total SIP Messa
g
e Received:
14
Total RTP Packet Sent:
341
Total RTP Packet Received:
392
Total RTP Packet Loss:
1
All Rights Reserved Grandstream Networks, Inc. 2005
MAC Address
The device ID, in HEX format. This is very important ID for ISP
troubleshooting.
WAN IP Address
This field shows WAN port IP address.
Product Model
This field contains the product model info, like HT487 is HT486
Rev:2.0
Software Version
Program: This is the main software release. This number is
always used for firmware upgrade. Here the box showed: 1.0.6.0
Bootloader: This is normally not changed.
HTML: This is the user interface, normally not changed.
VOC: This is the codec program, normally not changed.
System Uptime
This shows system up time since last reboot.
Registered
This shows whether the unit is registered to service provider’s
server.
PPPoE Link Up
This shows whether the PPPoE is up if connected to DSL modem
NAT
This shows what kind NAT the HandyTone is connected to via its
WAN port. It is based on STUN protocol.