User's Manual

HandyTone 286 User Manual Grandstream Networks, Inc.
- 14 -
6 Configuration Guide
6.1 Configuring HandyTone IP through Voice Prompt
6.1.1 DHCP Mode
Follow section 4.1 with voice menu option 01 to enable HandyTone to use DHCP.
6.1.2 STATIC IP Mode
Follow section 4.1 with voice menu option 01 to enable HandyTone 286 to use STATIC
IP mode, then use option 02, 03, 04 to set up HandyTone’s IP, Subnet Mask, Gateway
respectively.
6.1.3 TFTP Server Address
Follow section 4.1 with voice menu option 06 to configure the IP address of the TFTP
server.
6.2 Configuring HandyTone with Web Browser
HandyTone 200 series ATA has an embedded Web server that will respond to HTTP
GET/POST requests. It also has embedded HTML pages that allow a user to configure
the IP phone through a Web browser such as Microsoft’s IE and AOL’s Netscape.
6.2.1 Access the Web Configuration Menu
First, get the IP address of the HandyTone through section 4.1 with menu option 02.
Then access the HandyTone’s Web Configuration Menu using the following URI:
http://Phone-IP-Address
,
where the Phone-IP-Address is the IP address of the phone.
Once this request is entered and sent from a Web browser, the IP phone will respond
with the following login screen: