User's Manual

HA100 User Manual
P a g e | 13
HA100 CONNECTION
This section provides the connection types and steps needed for connecting the HA100 with 2 UCM6510.
Powering And Connecting the HA100
The external connections are used on the external ports for following purposes:
Powering up the HA100, network connection, PSTN lines connection, Analog/Fax connection and also
digital (T1/E1/J1) connections.
Please refer to following steps for the basic connection on the HA100:
1. Connect one end of the Ethernet cable to the WAN port of the HA100, connect the other end of the
cable to the uplink of a hub or switch.
2. Connect 12V power adapter to the 12V power port on HA100, connect the other end to the power
jack.
Figure 7: Basic Connection on HA100
Optional Connections
Please refer to followings steps for the optional connections on the HA100:
1. For PSTN connection: Connect a PSTN cable to the FXO external port on HA100.
2. For Analog phone/Fax connection: Connect analog phone or FAX machine to the FXS external
port on HA100.
3. For T1/E1/J1 connection: Bring your digital connection cable from the service provider side to the
T1/E1/J1 external port on HA100.
4. For LAN connection: Connect one end of the Ethernet cable to the LAN external port on HA100,
connect the other end to switch, hub or etc.