User's Manual

FIRMWARE VERSION 1.0.0.2 GXW42XX USER MANUAL Page 29 of 52
Self Defined Time Zone The syntax is std offset dst [offset],start[/time],end[/time]
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
It indicates a time zone with 6 hours offset with 1 hour ahead which is the US
central time.
It is positive (+) if the local time zone is west of the Prime Meridian and negative
(-) if it is east.
Prime Meridian (International or Greenwich Meridian)
M3.2.0,M11.1.0
The 1st number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd
Tuesday etc)
The 3rd number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
Therefore, this example is the DST which starts from the second Sunday of
March to the 1st Sunday of November.
Language
Default is English. Languages supported with voice prompt.
In addition to the Basic Settings configuration page, end users also has access to the Device Status page.
TABLE 8: STATUS PAGE
MAC Address
The device ID in hexadecimal format. This is needed for Internet Service Provider
troubleshooting. Note: there are separate MAC addresses for the WAN side and the
LAN side. The LAN MAC address will be used for provisioning and can be found on the
label on original box and on the label located on the bottom panel of the device.
IP Address
Shows IP address of GXW42XX
Product Model
Contains the product model info.
Software Version
Program: This is the main software release. Boot and Loader are not changed often.
System Up Time
Shows system uptime since the last reboot.
PPPoE Link Up
Shows whether the PPPoE connection is running if connected to DSL modem.
NAT
Shows type of NAT the GXW42XX is connected to via its WAN port. It is based on
STUN protocol.