User's Manual
Table Of Contents
    P a g e  | 52  
GXW42xx User Manual 
Version 1.0.5.43 
Caller ID Display 
When set to “Auto”, the phone will look for the caller ID in the order of 
P-Asserted Identity Header, Remote-Party-ID Header and From Header 
in the incoming SIP invite. When set to “Disabled”, All incoming calls 
are displayed with “Unavailable”. 
SIP Settings - Session Timer 
Session Expiration 
The  session  timer  extension  enables  SIP  sessions  to  be  periodically 
“refreshed”  via  a  SIP  request  (UPDATE,  or  re-INVITE.  When  the 
session  interval  expires,  if  there  is  no  refresh  via  a  UPDATE  or  re-
INVITE message, the session will be terminated.  
Session  Expiration  is  the  time  (in  seconds)  at  which  the  session  is 
considered  timed  out,  if  no  successful  session  refresh  transaction 
occurs beforehand. The default value is 180 seconds. 
Min-SE 
The minimum session expiration (in seconds).  The default value is 90 
seconds.  
Caller Request Timer 
If  selecting  “Yes”  the  phone  will  use  session  timer  when  it  makes 
outbound calls if remote party supports session timer. 
Callee Request Timer 
If  selecting  “Yes”  the  phone  will  use  session  timer  when  it  receives 
inbound calls with session timer request.  
Force Timer 
If selecting  “Yes” the phone will use session timer even if the remote 
party does not support this feature. Selecting “No” will allow the phone 
to enable session timer only when the remote party support this feature. 
To turn off Session Timer, select “No” for Caller Request Timer, Callee 
Request Timer, and Force Timer. 
UAC Specify Refresher 
As a Caller, select UAC to use the phone as the refresher, or UAS to 
use the Callee or proxy server as the refresher.  
UAS Specify Refresher 
As a Callee, select UAC to use caller or proxy server as the refresher, 
or UAS to use the phone as the refresher. 
Force INVITE 
Session  Timer  can  be  refreshed  using  INVITE  method  or  UPDATE 
method. Select “Yes” to use INVITE method to refresh the session timer.  
SIP Settings - Security Settings 
Validate Incoming Messages 
Default is No. Defines whether the incoming messages will be validated. 










