User's Manual

P a g e | 46
GXW42xx User Manual
Version 1.0.5.43
Call Progress Tones
Using these settings, user can configure tone frequencies according to
user preference. By default, the tones are set to North American
frequencies. Frequencies should be configured with known values to
avoid uncomfortable high pitch sounds. ON is the period of ringing (ON
time in ms) while OFF is the period of silence. In order to set a
continuous ring, OFF should be zero. Otherwise it will ring ON ms and
a pause of OFF ms and then repeat the pattern.
• “Dial tone”
• “Ring back tone”
• “Busy tone”
• “Reorder tone”
• “Confirmation tone”
• “Call-Waiting tone”
• “Prompt Dial tone”
• “Conference Party hangup tone”
Please refer the document below to determine your local call progress
tones:
http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
FXO Failover
Failover to FXO Gateway
Enable or disable the Failover FXO Gateway.
FXO Gateway IP
IP Address or URI of the FXO gateway.
System Features
Disable Direct IP Call
Disables the Direct IP Call function. Default is “No”. If set to “Yes” direct
IP-to-IP calling will not be supported.
Inter-port Calling
With this feature enabled, when the FXS port is unregistered, users can
use the same extensions of the FXS port for inter-port dialing instead of
dialing ***7xx.
Disable SIP NOTIFY
Authentication
Disables challenging SIP NOTIFY reboot and resync messages.
Disable Voice Prompt
Disables the voice prompt configuration. Default is “No”. If set to “Yes”
accessing integrated voice menu will be impossible.
IVR Language
Choose English, Chinese, or Spanish.