User's Manual

FIRMWARE 1.0.3.4 GXW42XX USER MANUAL PAGE 9 OF 56
CONNECT YOUR GXW4248 GATEWAY
Connecting the GXW4248 gateway is easy. Before you begin, please verify the contents of the
GXW4248 package.
EQUIPMENT PACKAGING
Unpack and check all accessories. Equipment includes:
• one device unit
• one RJ45 Ethernet cable
• one 24V 6.5A universal power adapter
• mount
CONNECT THE GXW4248
Follow these four (4) steps to connect your GXW4248 gateway to the Internet and access the unit’s
configuration pages.
1. Connect standard touch-tone analog phones to the GXW4248’s RJ21 port with a RJ11 to R21
cable.
2. Insert an RJ45 Ethernet cable into the WAN port of GXW4248 and connect the other end to an
uplink port (a router or a modem, etc.)
3. Plug the power adapter into the GXW4248 gateway into a power outlet.
Follow the instructions from the topic “
Configuring GXW 42XX with Web Browser” for initial configuration.
The GUI pages will guide you through the remaining steps to set-up your gateway.