User's Manual

FIRMWARE 1.0.3.4 GXW42XX USER MANUAL PAGE 30 OF 56
access settings can be set here.
• PROFILE - AUDIO SETTINGS: DTMF, Vocoder, and Analog Line settings can be configured here
for each port.
Additional functions available to administrators are:
• MAINTENANCE: Full settings for network, upgrade/provisioning, TR-069, Security and Syslog.
• ADVANCED SETTINGS: To set advanced Ring Tongs, FXO Failover, and System Features.
• PROFILE X: To configure each of the SIP accounts.
• FXS PORTS: To configure each of the FXS ports and Hunting Groups etc.
TABLE 7: STATUS
System Info
Product Model
Contains the product model info.
Part Number
Product Part Number.
Software Version
Program: This is the main software release. This number is always used for firmware upgrade.
current version is 1.0.3.4.
Boot: current version is 1.0.3.2.
Core: current version 1.0.3.3.
Base: current version is 1.0.3.4.
System Up Time
Shows system uptime since the last reboot.
System Time
The time according to NTP server.
Service Status
Shows the status of the VOIP applications.
Network Status
MAC Address
The device ID in hexadecimal format. This is needed for Internet Service Provider
troubleshooting. The MAC address will be used for provisioning and can be found on the label on
original box and on the label located on the bottom panel of the device.
IP Address Mode
Shows the current IP mode.
IP Address
Shows IP address of GXW4248.
Subnet Mask
Shows Subnet Mask of GXW4248.
Gateway
Shows Default Gateway of GXW4248.
DNS Server
Shows DNS Server of GXW4248.