User's Manual

P a g e | 58
GXW42xx User Manual
Version 1.0.5.43
and 911
Note: In some cases user wishes to dial strings such as *123 to activate
voice mail or other application provided by service provider. In this case
* should be predefined inside dial plan feature and the Dial Plan will be:
{ [x*]+}.
Use # as Dial Key
Allows users to configure the “#” key as the “Send” (or “Dial”) key. If set
to “Yes”, “#” will send the number. In this case, this key is essentially
equivalent to the “Dial” key. If set to “No”, this “#” key can be included
as part of number.
Disable # as Redial key
When “Use # as dial key” is enabled, and this option is set to NO, the
“#” key will function as redial key but If it’s set to “Yes” “#” key will not
function as redial key.
No Key Entry Timeout
Default is 4 seconds. Call will be completed within this time interval if
no additional key entry occurs.
Off-Hook Auto-Dial Delay
Determines how many seconds after off-hook to wait before autodialing
the extension set under Advanced Port Settings. The range is 0 to 60
seconds.
Allow Auto-Dial Config Per
Port
Allow users to configure Auto-Dial feature per port when hunting group
is enabled. This feature is disabled by default.
Disable Call Waiting
Default is No. If set to Yes Call Waiting indication information will not be
provided to analog phone connected to this FXS port.
Disable Call Waiting Caller ID
Default is No. If set to Yes Call Waiting caller ID will not be provided to
analog
phone connected to this FXS port.
Disable Call Waiting Tone
Default is No. This is to disable the stutter Call Waiting Tone when a
Call Waiting call arrives. The CWCID will still be displayed.
Disable Connected Line ID
Default is No. If set to Yes, Connected Line ID will not be displayed even
received.
Disable Receiver Offhook
Tone
Default is No. If set to Yes, ROH tone will not be played after off hook
for 60 seconds.