User's Manual
Table Of Contents
    P a g e  | 50  
GXW42xx User Manual 
Version 1.0.5.43 
account, will be able to place outbound calls using the SIP credentials 
of the primary Hunting Group port. Default is No.  
For example: Port 1, 3 and 5 are members of the same Hunting Group.  
Port 1 is registered with a SIP account. Ports 3 and 5 are not registered.  
Ports 3 and 5 will be able to place outbound calls using the SIP account 
of port 1, even if Outgoing Call without Registration is set to No. 
Register Expiration 
Allows  the  user  to  specify  the  time  frequency  (in  minutes)  for  the 
GXW42XX  to  refresh  its  registration  with  the  specified  registrar.  The 
default  interval  is  60  minutes  (or  1  hour).    The  maximum  interval  is 
65535 minutes (about 45 days). 
SIP Registration Failure Retry 
Wait Time 
Allows  the  user  to  specify  the  time  frequency  (in  seconds)  for  the 
GXW42XX to re-register after registration failure. The default interval is 
20 seconds. The maximum interval is 3600seconds (1 hour). 
SIP Registration Failure Retry 
Wait Time upon 403 Forbidden 
Default  is  1200  sec.  Specifies  the  interval  to  retry  registration  if  the 
process  is  failed  due  to  403  Forbidden.  Valid  range  is  0  to  3600  in 
second. 0 second means stop retry registration.  
Reregister Before Expiration 
Determines how many seconds before the previous registration expires 
that the port should reregister. 
Local SIP Port 
Defines the local SIP port the GXW42XX will listen and transmit. The 
default value for Profile 1 is 5060 and 6060 for Profile 2. 
Use Random SIP Port 
Default is No. If set to Yes, the device will pick randomly-generated SIP 
ports. This is usually necessary when multiple GXW42XX /HT50X are 
behind the same NAT. 
Local RTP port 
Defines the local RTP port used to listen and transmit RTP packets. The 
default value is 50000 for Profile 1, 51000 for Profile 2, 52000 for Profile 
3 and 53000 for Profile 4. 
SIP T1 Timeout 
T1 is an estimate of the round-trip time between the client and server 
transactions.  
If the network latency is high, select larger value for more reliable usage. 
SIP T2 Timeout 
Maximum retransmission interval for non-INVITE requests and INVITE 
responses. 










