User's Manual

P a g e | 30
GXW42xx User Manual
Version 1.0.5.43
CALL FEATURES
GXW42XX supports the traditional telephony features available in a PBX as well as additional advanced
telephony features.
Table 6: Call Features Table (Star Code)
Key
Call Features
*02
Forcing a Codec (per call): *027110 (PCMU), *027111 (PCMA), *02723 (G723),
*02729 (G729), *0272616 (G726-r16), *0272624 (G724-r24), *0272632 (G726-r32),
*0272640 (G726-r40), *027201 (iLBC)
*03
Disable LEC (pe call) Dial “*03” +” number”. No dial tone is played in the middle.
*16
Enable SRTP
*17
Disable SRTP
*30
Block CallerID (for all-config change)
*31
Send CallerID (for all-config change)
*67
Block CallerID (per call)
*82
Send CallerID (per call)
*47
Direct IP Calling. Dial “*47” + “IP address”. No dial tone will be played in the middle.
Detail see Direct IP Calling section on page 12.
*50
Disable Call Waiting (for all-config change)
*51
Enable Call Waiting (for all-config change)
*69
Call Return Service: Dial *69 and the phone will dial the last incoming phone number
received.
*70
Disable Call Waiting (Per Call)
*71
Enable Call Waiting (Per Call)
*72
Unconditional Call Forward: Dial “*72” and then the forwarding number followed by
“#”. Wait for dial tone and hang up. (dial tone indicates successful forward)
*73
Cancel Unconditional Call Forward: Dial “*73” and wait for dial tone, then hang up.
*74
Enable Paging Call: Dial “*74” and then the destination phone number you want to
activate in Paging mode.