User's Manual
FIRMWARE VERSION 1.0.0.2 GXW42XX USER MANUAL Page 8 of 52
CONNECTYOURGXW42XXGATEWAY
Connecting the GXW42XX gateway is easy. Before you begin, please verify the contents of the
GXW42XX package.
EQUIPMENTPACKAGING
Unpack and check all accessories. Equipment includes:
• one device unit
• one RJ45 Ethernet cable
• one 12V 5A universal power adapter
• mount
CONNECTTHEGXW42XX
Follow these four (4) steps to connect your GXW42XX gateway to the Internet and access the unit’s
configuration pages.
1. Connect standard touch-tone analog phones to the GXW42XX’s RJ21 port with a RJ11 to R21
cable.
2. Insert an RJ45 Ethernet cable into the WAN port of GXW42XX and connect the other end to an
uplink port (a router or a modem, etc.)
3. Plug the power adapter into the GXW42XX gateway into a power outlet.
Follow the instructions from the topic “Configuring GXW 42XX with Web Browser
” for initial configuration.
The GUI pages will guide you through the remaining steps to set-up your gateway. Examples of the GUI
Interfaces can be downloaded from:
http://www.grandstream.com/products/gxw_series/GXW42XX/documents/GXW42XX_gui.zip
.