User's Manual

FIRMWARE VERSION 1.0.0.2 GXW42XX USER MANUAL Page 30 of 52
Port Status
Displays relevant information regarding the individual FXS ports. Example:
Port Hook Registration DND Forward Busy
Forward
Delayed
Forward
FXS1 On Hook Registered
No 613
FXS2 Off Hook Registered
No 614
FXS3 On Hook Not
Registered
No
… … …
FXS24 On Hook Registered
Yes 615
FXS port 24 user has set Do Not Disturb.
FXS port 1 user has set his calls to be forwarded unconditionally to ext 613
FXS port 2 user has set his calls to be forwarded to 614 when his phone is busy.
FXS port 3 user is not registered with his SIP Server.
Advanced User configuration includes not only the end user configuration, but also advanced
configurations such as: SIP configuration, Codec selection, NAT Traversal Setting and other
miscellaneous configuration.
TABLE 9: ADVANCED SETTINGS
Admin Password
Administrator password. Only the administrator can configure the “Advanced Settings”
page. Password field is purposely left blank for security reasons after clicking update
and saved. The maximum password length is 25 characters.
Layer 3 QoS
This field defines the layer 3 QoS parameter which can be the value used for IP
Precedence or Diff-Serv or MPLS. Default value is 48.
Layer 2 QoS Value used for layer 2 VLAN tag. Default setting is blank.
STUN Server
IP address or Domain name of the STUN server.
STUN server assists devices behind a NAT firewall or a router to set up calls via VoIP.
STUN server is often provided by the VoIP service provider or a public STUN server
can be used. For a sample list of public free STUN servers please refer to:
http://www.voip-info.org/wiki-STUN
Keep-alive interval
This parameter specifies the number of seconds after which a new blank UDP packet
will be sent out to the proxy/server port in order to have the port stay open and the
device remain reachable. Default is 20 seconds.