User's Manual

Grandstream Networks, Inc. GXV3672_HD/FHD User Manual Page 27 of 36
Firmware Version 1.0.1.68 Last Updated: 11/2012
SMTP Setting Page (Email Alarm)
This page allows user to configure email client to send out email when alarm trigged:
Figure 12: SMTP Setting Page
• Enable SMTP: When checked, email client is enabled.
• SMTP Server: SMTP Email Server IP or Domain Name
• SMTP Server Port: Port number used by server to send email
• From Email address: The email address of alarm email sending from, usually client email ID
• To E-Mail address: The email address to receive the alarmed email, total 3 included.
• User Name: Email client User ID
• Password: Email client password
• SSL: Check if the SMTP email server requires SSL
NOTE:
¾ Click “Save” to save the email configuration information.
¾
Click “Test” after configuration, if setting is correct, a test email will send out and “Test
successful!” yellow bar will display like below