User's Manual

GXV3662_FHD IP Camera
Firmware 1.0.1.11 Page 30 of 36
Grandstream Networks, Inc. 01/2011
Show Motion Detection Regions – If
this option is selected, the motion
detection regions will be displayed on
the screen with a white border.
To Edit a Monitored Area
1. In the Select a Region dropdown list, select
the region ID.
2. Click Edit.
3. Click on the video, drag and draw you
preferred area.
4. Set the Sensitivity. Click the Save button to
save the sensitivity.
NOTE: The Sensitivity value varies from 0 to
100. The larger the value is, the higher the
sensitivity.
5. Click Save to save the settings.
To Remove a Monitored Area
1. In the Select a Region dropdown list, select the region you would like to remove.
2. Click Remove.
3. Click Save to save the changes.
Configure Motion Detection & Alarm Actions
An alarm action is what the GXV3662_FHD is going to do when an alarm is triggered during
the defined time period – the time
schedule. The GXV3662_FHD allows
multiple alarm actions.
Button to save sensitivity
only
The white border for Motion
Detection Regions
NOTE: If Upload to Alarm
center is checked for Alarm
Actions, the white border will
flash red when a motion
detection alarm is triggered.