User's Manual

GXV3662_FHD IP Camera
Firmware 1.0.1.11 Page 29 of 36
Grandstream Networks, Inc. 01/2011
Click Add to add a new time schedule.
To delete a schedule, check the schedule you would like to remove and click Delete.
How to connect an Alarm Output Equipment to GXV3662_FHD
Here is a sample connection diagram. Connect the alarm output equipment to the
GXV3662_FHD by following the diagram below.
GXV3662_FHD Motion Detection Page
The GXV3601 supports Motion Detection. To utilize this feature, please follow the steps
below:
1. Setup the motion detection monitored area.
2. Configure the motion detection time schedule.
3. Configure alarm action properly.
Setup Motion Detection Monitored Area
Enable Motion Detection – If this option is selected, motion detection will be enabled. If
something/somebody moves in the motion detection region, an alarm will be triggered.