User's Manual

GXV3662_FHD IP Camera
Firmware 1.0.1.11 Page 26 of 36
Grandstream Networks, Inc. 01/2011
configured.
User Name/ Password – The user name and password required to log in to your SMTP
server, for example, [e-mail]/123.
SSL – Checked if the SMTP server requires a secure connection.
Test Email Account Settings – Click the Test button to send a test email from the From
E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get
the test email, then the SMTP settings are ready to go.
GXV3662_FHD FTP Page
The FTP server is used to store video files if you configure the GXV3662_FHD to record
video and upload it to the FTP server when an alarm event or motion detection is triggered.
FTP Settings
Enable FTP – The default setting is “No,” if you want the GXV3662_FHD to upload the
recorded video to the FTP server when an alarm is triggered, set this field to “Yes.”
FTP Server – The IP address or hostname
of the SMTP server, ie. ftp.myserver.com
.
FTP Server Port – The port that your FTP
server is using.
User Name / Password – The user name
and password required to log into your
FTP server
Path – The directory in the FTP server
where recorded video will be uploaded.
Test FTP Account Settings – Click the
Test button to upload a sample file to make
sure that FTP is properly configured.
GXV3662_FHD Alarm Event
The GXV3662_FHD supports alarm inputs, for example, infrared detector, smoke detector
and so on.
Follow the steps to make Alarm Input work:
1. Connect the alarm input equipment to the GXV3662_FHD.
2. Set up the alarm event time schedule.
3. Configure the alarm actions which you would like the GXV3662_FHD to take when
the alarm is triggered.
How Alarm Input and Alarm Output Work